Comment nos algorithmes d'empotage 3D réduisent les coûts de fret maritime jusqu'à 35% par m².
International ocean and road freight efficiency is a major determinant of total landed steel building costs. Standard 40ft High Cube (HC) shipping containers have an internal length of 12.03m, width of 2.35m, height of 2.69m, and a maximum payload capacity of approximately 26.5 to 28.0 metric tons. SerBuild utilizes proprietary 3D BIM container packing simulation algorithms that nest heavy hot-rolled I-beams with compact cold-formed Z-purlins, hardware boxes, and sandwich panel packs. This maximizes volumetric filling (70–76 m³ per container) and payload density, reducing total container requirements by 25% to 35% compared to conventional loading methods.
Shipping structural steel across international borders without smart nesting results in shipping expensive "empty air". SerBuild employs a multi-tiered container optimization workflow:
The table below details typical container quantities and freight estimates for standard industrial steel buildings shipped to European ports (2026):
| Building Footprint Area | Total Steel Tonnage | Cladding Area (80mm PIR) | 40ft HC Containers Required | Ocean/Road Freight Estimate |
|---|---|---|---|---|
| 500 m² (Small Workshop) | 16 – 20 Tons | 850 m² | 1x Steel + 1x Panel (2 Total) | €3,600 – €5,400 |
| 1,200 m² (Logistics Hall) | 38 – 46 Tons | 1,850 m² | 2x Steel + 2x Panel (4 Total) | €7,200 – €10,800 |
| 2,500 m² (Manufacturing Plant) | 80 – 105 Tons | 3,400 m² | 4x Steel + 4x Panel (8 Total) | €14,400 – €21,600 |
| 5,000 m² (Distribution Hub) | 170 – 220 Tons | 6,200 m² | 8x Steel + 7x Panel (15 Total) | €27,000 – €40,500 |
| Shipping Mode | Maximum Member Length | Payload Capacity | Cost Index per Ton | Best Suited For |
|---|---|---|---|---|
| 40ft High Cube Container (Standard) | 11.85 meters | 26.5 Tons / 76 m³ | Lowest (100% Base) | Standard modular portal frames & panels |
| Standard 13.6m Mega-Trailer (Road) | 13.50 meters | 24.0 Tons / 95 m³ | Low to Moderate (+15%) | Direct door-to-door transit to Central Europe |
| Open-Top Container (Crane Loading) | 11.85 meters | 26.0 Tons | Moderate (+25%) | Very heavy single girder assemblies |
| Flat-Rack Container (Oversized) | Up to 15.0 meters | 35.0 Tons | High (+60% to +90%) | Unusually wide trusses or monolithic crane beams |
Structural engineers configure rafter splices to maximize 11.85m container constraints.
Specialized software generates the exact 3D positioning of each member and bundle.
Every steel piece receives a durable weatherproof alphanumeric and QR-code label.
Bundles loaded onto padded dunnage with heavy ratchet lashing and desiccants.
Live GPS container tracking provided from Istanbul port to your local European terminal.
Containers unpacked using standard telehandlers or mobile cranes in under 3 hours per container.
Transmettez dimensions, portées et coordonnées géographiques. Notre bureau d'études structure fournit une offre détaillée et une pré-analyse Eurocode 3 sous 24 à 48h.
Réponses détaillées sur l'ingénierie Eurocode, la fabrication, l'exportation et le montage.
A standard 1,000 m² steel warehouse (e.g. 20m x 50m x 6m eave) typically requires 3 to 4 forty-foot High Cube containers: 2 containers for the structural steel frame, bolts, and purlins, and 1 to 2 containers for the insulated sandwich panels and trim.
The maximum practical steel beam length for a 40ft High Cube container is 11.85 meters (allowing 18cm tolerance for door swing and container dunnage). For longer spans, we engineer high-strength bolted splices per Eurocode 3.
Steel bundles are equipped with heavy lifting straps. You can unload the container from the rear using a telehandler/forklift with extended tines, or pull bundles sequentially onto a staging bed using a small winch or crane sling.
Containers are standard shipping line carrier units (SOC / Carrier Owned). They arrive at your jobsite on a chassis trailer, are unloaded within a 2–3 hour free unloading window, and the truck returns the empty container to the local port depot.
All shipping containers are equipped with industrial moisture-absorbing silica gel desiccant poles, and steel elements are wrapped in heavy-duty weatherproof polyolefin film to prevent "container rain" condensation.
Transmettez-nous vos dimensions ou plans pour une analyse d'ingénierie et une offre détaillée sous 24 à 48 heures.