Mise en conformité avec les degrés coupe-feu (R30 à R120) et les exigences thermiques RE2020.
Designing modern steel buildings in Europe requires strict compliance with two major regulatory frameworks: European Fire Safety Standards (Eurocode 3 EN 1993-1-2 and EN 13381-4) and European Energy Performance Directives (EPBD, GEG in Germany, and RE2020 in France). Unprotected structural steel maintains structural integrity up to critical temperatures of approximately 500°C to 550°C. To achieve required municipal fire ratings of R30, R60, R90, or R120 (30 to 120 minutes of load-bearing stability during fire), structural steel is protected using thin-film intumescent reactive coatings, high-density mineral wool encasement, or calcium silicate boards. Simultaneously, envelope thermal performance is optimized with airtight PIR/mineral wool sandwich panels achieving U-values down to 0.14 W/m²K, preventing cold bridging and eliminating condensation.
Achieving regulatory fire safety approval requires precise section factor analysis and certified protective systems:
The table below summarizes passive fire protection systems, costs, and thermal envelope metrics (2026 European data):
| Protection / Insulation System | Fire / Thermal Performance | Application Method | Cost Range (€/m²) | Typical Best Application |
|---|---|---|---|---|
| Unprotected Steel (Inherent R15) | R15 (~15 minutes stability) | Standard anti-corrosion paint | €0 (Included) | Single-storey open-sided sheds, agricultural storage |
| Thin-Film Intumescent Paint (R30) | R30 (30 min stability) | Airless spray application (350µm DFT) | €12 – €18 / m² steel | Standard single-storey commercial & logistics warehouses |
| Thin-Film Intumescent Paint (R60) | R60 (60 min stability) | Multi-coat airless spray (850µm DFT) | €22 – €35 / m² steel | Manufacturing plants, retail centers, low-rise offices |
| Intumescent Paint (R90) | R90 (90 min stability) | High-build spray (1,600µm DFT) | €38 – €58 / m² steel | Multi-storey buildings, public assembly venues |
| Mineral Wool Board Encasement (R120) | R120 (120 min stability) | Framed mineral wool / calcium silicate | €45 – €75 / m² steel | High-risk chemical facilities, multi-storey steel framing |
| 100mm PIR Roof Sandwich Panel | U = 0.22 W/m²K (EPBD Compliant) | Continuous tongue-and-groove joint | €34 – €48 / m² panel | Standard heated commercial warehouses across Europe |
| Fire Protection Method | Aesthetic Appearance | Durability & Cleanliness | Cost Index per m² | Best Suited For |
|---|---|---|---|---|
| Thin-Film Intumescent Paint | Sleek, architectural exposed steel | Excellent (Smooth painted surface) | Moderate (€15–€35/m²) | Architectural offices, retail, visible showroom steel |
| Mineral Wool Box Cladding | Boxed rectangular finish | High durability, impact resistant | Moderate to High (€35–€65/m²) | Heavy industrial factories, plant rooms, parking decks |
| Cementitious Spray Coating | Rough, textured plaster-like finish | Can chip if struck by forklifts | Low to Moderate (€18–€30/m²) | Concealed ceiling voids, hidden structural frames |
| Fire-Rated Sandwich Panels | Clean architectural panel finish | High durability, washable surface | Envelope cost only | Internal fire compartmentation walls (REI 60–120) |
Determine required fire resistance rating (R30, R60, R90, or R120) from building plans.
SerBuild engineers calculate exact profile geometry for every column and rafter.
Output exact Dry Film Thickness (DFT) tables certified under EN 13381-4.
Configure PIR or mineral wool sandwich panels to comply with local EPBD/GEG energy codes.
Incorporate EPDM isolation tapes at purlins and eaves to eliminate cold bridging.
Provide fire certificates and thermal reports for building control approval.
Transmettez dimensions, portées et coordonnées géographiques. Notre bureau d'études structure fournit une offre détaillée et une pré-analyse Eurocode 3 sous 24 à 48h.
Réponses détaillées sur l'ingénierie Eurocode, la fabrication, l'exportation et le montage.
Not all buildings require fireproofing. Single-storey warehouses located far from property boundaries with low fire loads often require only inherent fire stability (R15). Buildings requiring R30 to R120 ratings mandate intumescent coatings or mineral wool cladding per municipal fire codes.
Intumescent paint contains specialized chemical compounds (acid sources, blowing agents, and carbonifics). When heated above 200°C, the paint expands up to 50 times its thickness into a thick, porous carbon foam layer that insulates the steel from intense flames.
Yes. SerBuild can apply factory-certified off-site intumescent primer/coatings in controlled shop conditions, saving valuable construction time on site. Connection joints are touched up after final bolt torquing.
Under the European Energy Performance of Buildings Directive (EPBD), heated commercial and industrial buildings typically mandate roof U-values ≤ 0.20 to 0.24 W/m²K (achieved with 100mm PIR panels) and wall U-values ≤ 0.24 to 0.28 W/m²K (achieved with 80mm PIR panels).
Internal firewall partitions are constructed using 120mm to 150mm non-combustible Stone Wool (Mineral Wool) sandwich panels (Euroclass A2-s1,d0) mounted to secondary steel framing with fire-rated labyrinth seals and intumescent mastic, providing 2 hours of fire containment.
Transmettez-nous vos dimensions ou plans pour une analyse d'ingénierie et une offre détaillée sous 24 à 48 heures.